超碰在线中文字幕,色鬼久久,亚洲AV永久无码天堂人与鲁,超碰人人爱潮喷

1) Avoid consistent contact with cosmetics such as face powder, which may enter the watch through cracks and seams, polluting lubricants in the watch, and affecting other parts. Take special care not to put the watch in a wardrobe with camphor, as it may gasify and diffuse into the case, solidifying lubricants in the watch, and reducing rust prevention and lubrication properties, leaving watch parts exposed to rusting and excessive wear. Furthermore, it can affect the watch’s accuracy and reduce its service life.
2) Watches must be checked regularly. They should be opened, cleaned and lubricated every 3 years. Watches that are not properly sealed should be serviced even more frequently.
3) Clean and lubricate your watch before long-term storage, and wind it once or twice every month to ensure it works well.
4) Watch storage: Do not put your watch into pockets or leather bags, to avoid tiny fabric strands or dust from entering your watch. Also avoid placing with volatile oil, perfume and other cosmetics that may corrode and oxidize watch parts. Store your watch in cool dry packaging when not in use for extended periods of time.
5) Remove your watch before sleeping, as sheet fibers and cotton fibers may affect its operation. Also, temperature changes while sleeping may adversely affect the watch.

1. Maintaining quartz watches
1) After adjusting date and day, make sure the watch crown is pushed back to Position “0” and the crown is screwed-down and completely locked, to prevent water or dust from entering the watch, which may lead to rust or oxidation in the watch hands and dials, and obstruct the movement.
2) Keep away from magnetic objects: Watch parts are made of metal, and even though the watch has anti-magnetic properties, avoid placing it in close proximity to magnetic objects like radios, TVs and other electrical appliances that may create a magnetic field, as it may affect the watch’s performance.
3) Please keep your watch away from solvents, mercury, cosmetic sprays, cleaners, adhesives, paints and camphor, to protect your watch case and band from discoloration, deterioration and damage. Avoid exposure to camphor as it can dissolve oils, including lubricants in watch parts, reducing lubrication and affecting watch’s performance.

2. Maintainaing mechanical watches
1) Wind your watch regularly and completely. Stop winding the crown when you feel resistance
2) To set the time, release the crown from the locked position by pulling the crown out for adjustment. You can rotate the crown either clockwise or anticlockwise to adjust the time. However dates in calendar watches can only be adjusted with clockwise rotation. Please refer to corresponding instructions for specific watch adjustments
3) Avoid sudden heat or cold temperature changes. Extreme temperature changes may cause timekeeping errors. The spring in mechanical watches can easily break due to rapid temperature changes; water-resistant properties and timekeeping accuracy may also be affected.
4) Avoid strenuous vibrations. Excess force or torque generated from strenuous vibrations can impair or deform precision parts in the watch, affecting timekeeping quality.
5) Placing your watch near devices that generate magnetic fields can affect timekeeping accuracy. Common objects that generate magnetic fields such as horns, speakers, computers, automatic mahjong tables and mobile phones can affect watch parts. If your watch runs 10 minutes faster than usual, it means that your watch has been magnetized. You will need to demagnetize your watch and recalibrate it to maintain accuracy. If your watch is keeping slower time, you should visit a professional store to open the rear cover and service it. If your watch is slowing down day-by-day, it should be cleaned and lubricated, as simple time adjustment may not work.
6) Please clean and lubricate your watch before storing it for a longtime. Wind it once or twice a month to keep it in good running condition.

Avoid extreme temperature changes: As the watch case is made of different materials, extreme temperature change is likely to affect its fitting, water-resistance property and its timekeeping precision. The ideal temperature is 23°C ±2°C.

1) Our analog quartz watches use high-energy disposable silver oxide batteries made in Switzerland or Japan (these batteries cannot be used after they are fully discharged). The average life of regular batteries is about 18 months (usage life stipulated by GB Standard is over 1 year). Tian Wang Lightweight Kinetic Men’s Watches use rechargeable batteries, which need not be replaced in general.
2) Replace dead batteries at the earliest. Do not let dead batteries remain in the watch for a long time, as it can lead to swelling and leakage, damaging the watch’s movement.

The watch band’s length should be adjusted to fit your wrist comfortably. If it is too long, the watch may strike objects affecting the watch’s movement or spring pins, and the lugs may also deform or break.

1) Keep watches away from magnetic objects. Although the watches’ hardware components have anti-magnetic characteristics, exposure to magnetic fields found in everyday items like speakers, TVs, radios and other electrical appliances can adversely affect a watch’s ability to maintain time.
2) Watches affected by magnetism remain magnetically charged, which affects time accuracy. Everyday items like magnetic horns, speakers, computers, automatic mahjong tables and mobile phones create magnetic fields and may adversely affect watch parts. If your watch runs faster by 10 minutes or more in one day, then it has been magnetized. Demagnetize your watch and recalibrate the time to maintain accuracy.
3) Avoid severe shock: Remove your watch before taking part in strenuous physical activities such as sports to avoid strong impacts. Although Tian Wang watches are shock-proof, avoid dropping them or knocking against hard objects as it may lead to permanent deformation of watch parts, and affect time accuracy.
4) Non-professional personnel should not remove the back cover of the watch, to avoid dust and moisture from seeping into the watch, affecting its performance. Improper use can also affect waterproof properties of watch cases and back covers.
5) Avoid dramatic temperature changes: As the watch case is made of different materials, dramatic temperature changes are likely to affect part fittings, waterproof properties and timing precision. The ideal temperature is 23°C ±2°C.
6) Wind your watch regularly and completely. Stop winding when the crown cannot be rotated.
7) Avoid sudden heat or cold temperature changes. Extreme temperature changes may cause timekeeping errors. Springs in mechanical watches may break easily due to rapid temperature changes. It also affects the watch’s waterproof properties and decreases timekeeping accuracy.
8) Avoid strenuous vibration. Excess force or torque generated from strenuous vibration will impair or deform precision watch parts, affecting timekeeping quality.

1) Non-professional personnel should not open the rear cover, as water and dust may seep into your watch, causing it to stop or lead to impaired functions. Improper use will reduce water resistance of watch cases and rear covers.
2) Keep away from water and steam. Waterproof watches may age and rust over time due to exposure to changes in temperature. Avoid contact with water or steam to prevent discoloration and deformation. We advise you to take off your watch when washing hands or bathing.
3) Watches need regular checks, cleaning and oiling. They should be opened for cleaning every 3 years. However, cases that are not very well sealed should be serviced regularly.
4) Avoid sudden heat or cold temperature changes. Extreme temperature changes may affect the watch’s performance and timekeeping abilities. Mechanical watch parts are made of metal, and may expand or contract due to temperature changes, which may cause them to break or influence timekeeping accuracy. Additionally, it may affect the watch’s water resistance.
5) Avoid soaking or making your watch wet. Remove your watch before washing and bathing, as changes in temperature or chemicals in detergents may affect proper functioning, accelerate aging and deterioration of waterproof components.

Please keep your watch away from solvents, mercury, cosmetic sprays, cleaners, adhesives, paint and camphor, to protect your watch case and band from discoloration, deterioration and damage. Avoid exposure to camphor as it can dissolve oils, including lubricants in watch parts, reducing lubrication and affecting watch’s performance.

售后服務
感謝您選擇天王表，如您的手表在使用過程中出現問題，憑有效保修憑證和購表發票，可享受天王電子(深圳)有限公司提供專業的售后服務。

保修內容
自購買之日起兩年保修服務項目如下:
★手表使用中的非人為因素造成的停走或走時超差。
★手表因環境磁場造成的走時性能下降。
★手表在正常使用環境中因部分配件瑕疵造成的進水故障。
★手表表殼或字面上的字釘、石仔、商標、日歷框、圈口、螺絲非人為因素造成的脫落。
★手表電池。

注
★顧客注冊“天王表VIP”會員領取電子保修卡后，以上保修項目，可再延長一年保修。
★質保期滿后，顧客仍然可以享受天王電子(深圳)有限公司提供有償?shù)膶I(yè)售后服務。

非保修內容
★表殼、表帶、玻璃、圈口、柄頭等外觀件正常磨損，以及人為損壞上述工件造成的機芯受損與防水功能喪失。
★超過本手表正常使用環境的損傷，如:在桑拿環境中使用，在強烈震動的環境中使用造成的手表防水功能喪失，手表機件損壞。
★皮表帶、針織帶、橡膠帶的老化變色、以及電鍍部分的磨損褪色現象。
由未經天王電子(深圳)有限公司授權的維修服務站拆動過的手表。

致顧客
由于保修期內的手表維修為免費維修，您在購買天王表時有權要求天王表專柜正確、完整填寫銷售記錄及蓋章，同時開具購表發票。
當您的天王表在保修期內出現屬于保修范圍內的質量問題，請攜帶好有效保修憑證和購表發票前往天王表技術服務站，我們將為您提供免費服務。您的手表在維修過程中會有代用零件的更換或同類商品的交換等情況，屆時請予以諒解。
如有疑問歡迎致電天王表客服熱線4000667888。

The date changes at noon in Tian Wang calendars because our watches are set 12 hours behind Beijing time;
and the calendar changes the date at an interval of 24 hours.
You need to roll the hour hand forward to make a complete turn in the clockwise direction.

當你的手表有故障時，若尚處于維修網點不能覆蓋的顧客，可與總部聯系辦理郵寄修理業務或配件郵購業務。郵寄時請注明收件人聯系方式和地址以及手表故障的簡單描述，便于及時快捷的處理。若當?shù)貨](méi)有招商銀行的地區，可在四大銀行任何一個網點辦理通匯業務。

開戶行：招商銀行梅龍支行
開戶名稱：天王電子（深圳）有限公司
開戶帳號：755915887310201
聯行行號：308584001686

地址：深圳市光明區馬田街道合水口社區芳園路476號天王大廈
收件人：天王電子（深圳）有限公司 天王大廈9樓維修總部
郵政編碼：518106
電話：0755-81719888-616/805/639

Luxury timepieces need regular maintenance due their structure and design.

I. Watch Sealing: Most precious timepieces have water-resistant marks, such as 30M, 50M and 100M. Some may indicate that the watch is non-waterproof. Watches are designed to be either waterproof or non-waterproof, but this doesn’t mean that non-waterproof watches are not as good as waterproof watches.
In the market there are plastic watches that cost a few dozen RMB and are waterproof, but it doesn’t mean they are luxury timepieces. Watches with waterproof marks indicate how well a watch has been sealed against the ingress of water.
This does not, however mean that such watches are designed for repeated long-term use under water. For example, many customers who wear Piaget watches do not take watches off while bathing. They find that their watches are waterproof at first, but over time that changes and water starts seeping into the watch.
Proper corrective measures must be taken to prevent interior components from rusting, and if such care is not taken, it will result in customer complaints about the quality ofthe watch,along with a request for product exchanges.
To prevent such problems,we recommend that you do not wear watches in the sauna or shower, as it can lead to moisture or rust in the movement.
All watches should only be worn under normal conditions. Watches’ waterproof characteristics mainly depend on several tiny rubber rings, which are bound to age and lose their elasticity over time,causing air and water to enter into the watch.
Therefore, these watch seals should be periodically replaced to esnure waterproof level.

II. Mechanical Movement: Most high-end luxury watches are mechanical watches that use gears. Such watches are marked with the number of jewels they have. The number of jewels indicates the number of gear shafts with jewel bearings. As these jewels may wear away, the more jewel bearings there are on a watch, the longer is its service life. However, watch gears cannot be made of hard materials like diamonds, and only steel materials are used to make gear shafts, which will be tinier if the watch is smaller and thinner. Small amounts of oil in the bearings, makes watches resistant to abrasion. Once the oil dries out, it is hard for the gear shaft to turn, causing the watch to stop. Although luxury timepieces use special oil, it will also eventually dry up. Over time, several modifications and improvements in the structure and design of these watches have led to enhanced features, which explain the current prices. Earlier, design structures were not so complicated and gear shafts were not so slim.

III. Appearance Maintenance: Popular luxury watches usually use K gold, K platinum and luxury leather for their polished appearance. K gold may tarnish due to acidic elements in perspiration and air corrosion, so regular cleaning and polishing are necessary to maintain the watch. K Platinum comes with rhodium plating that wears off easily, leading to discoloration, which can be avoided with regular maintenance.
Leather straps become soiled with perspiration, causing premature hardening or tearing of the leather, reducing the strap’s life. Avoid wearing leather band watches while working out and during rain. Steel bands should be polished and renewed regularly, to maintain their value. Therefore, famous high-end luxury watches

The crowns and case attachments of most of our mechanical watches have screw structures. If the crown cannot be pulled out with slight force, it is a screw-down crown, and adjustments should be made following instructions for screw-down crowns.

Operating instructions:
Position “M0”: Lock position of screw-down crown.
Position “0”: Manual winding position (rotate crown clockwise).
Position “1”: Rotate crown clockwise to adjust day, and anticlockwise to adjust date.
Position “2”: Rotate crown to adjust hour and minute hands.

Note:
1. Single-calendar movement has no day functions.
2. Adjust and change date in calendars in ladies watches, by pulling the crown from Position “1” to Position “2”.

Setting Time:
1. Rotate the crown in anticlockwise direction to release the lock, and then pull the crown to Position “2” after the crown pops out.
2. Rotate the crown to adjust the hour and minute hands (as most mechanical watch movements have no second-stopping mechanism, the second hand cannot be stopped). To ensure accurate time setting, you should set the watch 5 minutes ahead, and then rotate the crown anticlockwise to set the time.
3. After adjusting hour and minute hands, compare the adjusted time to the standard time. Push the crown back to Position “0”, and screw-down the crown in clockwise direction.
4. Setting time in the clockwise direction can slow down the date and day, so you should first adjust the time, and then the date and day.
5. Under normal conditions, adjust date and day from 9:00 p.m. to 3:00 a.m.

First adjust the date and then adjust the day, and adjustments must be made within 3 hours. If you have any doubts, operate as follows: Pull crown to Position “2”, and rotate it clockwise. When the hour hand points between 12 to 3, the date and day will change according to the time being night, or 12:00 p.m.

Setting Date and Day
1. Pull the crown to Position “1” and rotate the crown clockwise to adjust the day. Rotate the crown anticlockwise to adjust the date. Push the crown back to Position “0”, and screw-down the crown in M0 direction.
2. Do not set date or day between 9 p.m. to 5:00 am, as it will not indicate the correct date or day the next day. To adjust the date and day during this time period, set the time to after this time period, and adjust the date and day, then reset the time to the current time.
3. The movement’s factory date setting is based on 31 days per month, so it is necessary to manually adjust the date in each solar month and in February.

The main purpose of watches is timekeeping, and if a defect arises, the manufacturer, sales company and service provider provide warranties. At the time of purchase,the watch’s exterior parts such as watch case, cover, hands, crystal, band and crown should be thoroughly checked by both parties. Scratches on the crystal, cracks, scratches on back cover, bent crown, and other similar defects are usually caused due to improper handling, which is why they are not under warranty. However, uneven dial scale and case asymmetry are manufacturing defects and are not caused due to improper handling. Therefore, they are covered under warranty.

天王表已正式授權深圳市時計寶商貿有限公司，深圳市天唯雅科技有限公司，深圳市半小時商貿有限公司，深圳市壹寸金科技有限公司及深圳市圣緹斯商貿有限公司合法網絡銷售代理商。具體如下：

1、天貓：天王旗艦店、天王半小時專賣店、天王壹寸金專賣店 、天王天唯雅專賣店、天王深圳專賣店
2、淘寶：天王表官方自營店、天王表官方店、天王表品牌折扣店
3、京東：天王表京東自營旗艦店 、天王手表旗艦店、天王時計寶專賣店 、天王唯雅專賣店、天王鐘表旗艦店 、天王表拍拍優品旗艦店、天王圣緹斯專賣店、天王女表旗艦店
4、蘇寧易購：天王表官方旗艦店、天王手表蘇寧旗艦店
5、唯品會：天王表、天王官方特賣旗艦店
6、平安信用卡商城：時計寶專營
7、掌上生活：天王旗艦店
8、招商銀行：天王旗艦店
9、分期樂：天王手表官方旗艦店
10、云集：天王旗艦店
11、騰訊薈聚：天王官方旗艦店
12、得物：天王
13、抖音:天王手表旗艦店、天王官方旗艦店、天王壹寸金手表專賣店、天王時計寶手表專賣店、天王鐘表旗艦店
14、快手:天王旗艦店
15、拼多多：天王手表旗艦店、天王腕表旗艦店、天王手表官方旗艦店、天王腕表官方旗艦店
16、小紅書：天王表TIANWANG